NX-300 Network Audio Adapter
NX-300 W
The TOA NX-300 is a network audio adapter that utilizes packet audio technology (*1). Connecting the NX-300 to a network (LAN or WAN) permits high-quality audio or contact control signals to be transmitted in real time. As existing networks can be used, systems can be constructed with no need for the installation of new wiring. Broadcasts using audio files and up to 8 different levels of priority control can also be made, and provided by stations, factories or other central facilities to individual bases. It can be mounted in an EIA equipment rack (1U size) with the use of an optional rack mounting bracket or installed on a wall using an optional wall mounting bracket. (*1) TOA's unique technology which makes it possible to transmit high-quality audio signals in real time over an IP network. (*1) TOA's unique technology which makes it possible to transmit high-quality audio signals in real time over an IP network.
Power Source | Supplied from an external 24 V DC (21.6 - 26.4 V) power supply or AC adapter AD-246 (option) or the equivalent |
---|---|
Power/Current Consumption | 10 W (AC operation) |
Audio Input | 2 channels Rated input: -20 dB (*2) (LINE)/-60 dB (*2) (MIC) PAD function (-16 dB (*2)) |
Audio Output | 2 channels Rated output: 0 dB (*2) (unbalanced input)/-2 dB (*2) (balanced input) |
Frequency Response | 50 Hz - 18 kHz (48 kHz sampling frequency |
Distortion | 0.2 % or less (1 kHz |
Signal to Noise Ratio | 73 dB or more (LINE signal level |
Separation | 70 dB or more (1 kHz |
Audio Format | WAV file |
Number of Storable Audio Files | Max. 8 |
Storable Time of Audio File | Max. 2 min. per audio file (16 kHz sampling frequency |
Control Input | 8 channels |
Control Input Failure Detection Section | Connection resistance to make the function inactive: 20 kΩ ±5 %%% Connection resistance to make the function active: 10 kΩ ±5 %%% Connector cable: Twisted pair cable (shielded type is recommended) Maximum cable distance: 10 m |
Control Output | 8 channels 2 channels |
Network Section | Network I/F: 10BASE-T/100BASE-TX Network protocol: TCP Audio packet transmission system: Unicast (Up to 16 simultaneous transmissions) Connector: RJ45 connector Voice sampling frequency: 8 kHz (controllable on the software) Quantifying bit number: 16 bits Voice encoding method: PCM Voice packet loss recovery: Silence insertion Audio delay time: Min. 20 ms |
Operation | 2 channels |
Indicator | 2 channels LNK/ACT (green) |
Setting Switch | Reset |
SD Section | For log storage (Max. 10000) Media: SD/SDHC card (Max. 32 GB) (*3) File system: FAT16 ※ Use only SD memory cards rated at 100mA current consumption or less. ※ No SD card provided. |
Installation Method | Rack |
Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) (0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) when AC adapter is in use) |
Operating Humidity | 90 %RH or less (no condensation) |
Finish | Pre-coated steel plate |
Dimensions | 210 (W) × 44.3 (H) × 258 (D) mm (8.27 x 1.74" x 10.16) |
Weight | 1.7 kg (3.75 lb) |
Accessory | Removable terminal plug (3 pins) …1 |
Option | Rack mounting bracket: MB-15B-BK (for rack mounting one NX-300 unit) MB-15B-J (for rack mounting two NX-300 units) Wall mounting bracket: YC-850 AC adapter: AD-246 |
When you need the AC adapter | be sure to consult your TOA dealer. |
---|
- (*1) TOA's unique technology which makes it possible to transmit high-quality audio signals in real time over on IP network.
- (*2) 0 dB = 1 V
- (*3) Not compatible with SDXC memory cards.
What's new
-
New Infomation
-
New Infomation
-
Pickup News
TOA's IP Intercom integrates with Genetec(TM) Security Center
-
IR topic