NX-100S Network Audio Adapter
NX-100S
The NX-100S Network Audio Adapter can transmit high-quality audio signals and such control dataas control input data over IP networks, such as LAN or Internet, in real time.It is especially useful when transmitting audio signals to remote locations, as Internet use keepsrunning costs lower than the use of dedicated lines.With the use of an optional rack mounting bracket, it can be mounted in an EIA Standard rack(1 unit size).
- * 0 dB = 1 V
Power Source | AC adapter AD-246 (optional) or the equivalent |
---|---|
Power Consumption | 7 W (when AD-246 (optional) is used) |
Audio Input | 1 channel (transformer-isolated) |
Audio Output | 1 channel (transformer-isolated) |
Frequency Response | 50 Hz - 14 kHz (when sampling frequency is 32 kHz) |
Distortion | 0.3 % or less (1 kHz |
Control Input | 8 channels |
Control Output | 8 channels |
Network I/F | 10BASE-T/100BASE-TX |
Network Protocol | TCP |
Audio PacketTransmission System | Unicast (Up to 4 simultaneous transmissions) |
Operating Temperature | 0 ℃ to +40 ℃ |
Operating Humidity | 90 %RH or less (no dew condensation should be produced) |
Finish | Steel plate |
Dimensions | 210 (W) × 44.7 (H) × 188 (D) mm |
Weight | 1.1 kg |
Accessory | CD (PC Installation & Operation software programs |
Option | Rack mounting bracket: MB-15B-BK (for rack mounting one NX-100S unit) MB-15B-J (for rack mounting two NX-100S units) AC adapter: AD-246 Note: When you need the AC adapter |
What's new
-
New Infomation
-
New Infomation
-
Pickup News
TOA's IP Intercom integrates with Genetec(TM) Security Center
-
IR topic