Products Lineup
Audio System
Amplifiers
Voice Evacuation System
PA Speakers
Pro-Audio Speakers
Wired Microphones
Wireless Microphones
Conference System
Network Audio Adapters
Intercom System
Megaphones
Mobile Amplifiers
Audio Source Device
Rack-mount Equipment
Program Timer
Mixers
Audio Signal Processors
CCTV System
PTZ Camera Systems
Fixed Cameras
Lenses for CCTV Cameras
Digital Video Recorders
Network Camera System (Netcansee)
Coaxial Multi-Transmission Unit
Camera Accessories
Other Equipment
Data Library

Here, TOA's Data Library equipped with a search engine offers its CAD drawings made out in pdf and dwg forms, EASE data, specification sheets, brochures, instruction and installation manuals, and a wealth of other product data for your downloading.

H-2WP 2-Way Surface-Mount Speaker System

H-2WP

Designed for outdoor-use applications, the H-2WP is a dome-shaped, small surface-mount 2-way speaker that ensures quality sound reproduction. The angle of speaker can be adjusted for 360 degrees parallel to the mounting surface. (For the installation on walls, however, keep the speaker facing down within 45 degrees left and right each.)

Photo
Specification
Enclosure Type Sealed type
Power Handling 120 W (continuous program/4 Ω), 40 W (continuous pink noise/4 Ω)
Rated Input 12 W (16 Ω, high impedance)
Rated Impedance 4 Ω, 16 Ω
100 V line: 830 Ω (12 W), 1.7 kΩ (6 W), 3.3 kΩ (3 W)
70 V line: 420 Ω (12 W), 830 Ω (6 W), 1.7 kΩ (3 W), 3.3 kΩ (1.5 W)
Sensitivity 88 dB (1 W, 1 m) at installation in 1/2 free sound field
(Measured by installing the unit in the center of a wall.)
Frequency Response 100 Hz - 20 kHz
Dust/Water Protection IP64
Speaker Component Low frequency: 10 cm cone-type, High frequency: Balanced dome-type
Input Terminal Detachable screw terminal, (+)/(-) 2 each (for bridging connection)
Usable Cable Solid cable, stranded cable: 0.2 - 2.5 m㎡ (AWG No. 24 - 14 equivalent)
Finish Punched net: Steel plate (zinc plating), white, powder coating
Frame: Fire-resistant ABS, white, paint
Base frame: Stainless plate
Dimensions φ268 × 111 mm
Weight 2.1 kg (including base frame)
Accessory Base frame ……1, Electrical box mounting screw ……1 set
Usable Electrical Box 1-gang type (with cover)(*1)
Other Feature Angle of speaker: 360 degrees adjustable in parallel to the mounting surface
(The angle should be kept within 45 degrees left and right each in a downward
direction for the wall installation.)
(*1) Without using an electrical box mounting the supplied base frame directly to a wall or ceiling allows the speaker installation.
Note: Do not install the unit where it is likely to be corroded in such places as indoor pools bathrooms
Top of the Page