Splashproof Box Speakers

The BS-1030B is a small, 2-way bass-reflex type speaker featuring a wide frequency range suitable for use for announcements and music playback. The BS-1030B can be used for both high-impedance and low-impedance applications. The speaker's splash-proof construction permits it to be installed under the eaves where the speaker is not directly exposed to rain.

The BS-1030W is a small, 2-way bass-reflex type speaker featuring a wide frequency range suitable for use for announcements and music playback. The BS-1030W can be used for both high-impedance and low-impedance applications. The speaker's splash-proof construction permits it to be installed under the eaves where the speaker is not directly exposed to rain.

The BS-5W is splashproof wall-mounted speaker employing a splashproof 10 cm full-range speaker. Applications of this speaker include uses at outdoor locations under eaves which can avoid direct water splash and at highly humid locations including locker rooms of shower rooms, swimming pools, and bath rooms.

The TOA BS-10WL incorporates a 10cm splashproof speaker, and a completely shielded polypropylene enclosure. With a splashproof speaker system, the BS-10WL can be installed in such humid places as bath rooms in hotels, swimming pools and even outdoors. The internal speaker is magnetically shielded, thus giving no bad influence to television sets even when the speaker system is placed close to them.

The BS-1110W Speaker is specifically designed to reproduce clear announcements. The speaker also features a wide horizontal directivity owing to the vertical arrangement of speaker units, distributing announcements to a wider area.

The BS-1120W Speaker is specifically designed to reproduce clear announcements. The speaker also features a wide horizontal directivity owing to the vertical arrangement of speaker units, distributing announcements to a wider area. A built-in tweeter centered in the speaker smoothes sound reproduction up to high frequencies.

The SP-410 bracket is used to mount a box speaker to a wall or surface. It can be installed in combination with a 2-unit electrical box and can easily set or change the speaker orientation.

The SP-420 is a bracket designed to exclusively mount the BS-1030W Universal Speaker in a wall or ceiling. The bracket can be easily mounted to the surface made of the plaster board or plywood. Make a 175×260 mm hole (tolerance: ±3 mm) in the wall or ceiling before mounting.